NYI Building Products

Contractors® 1000 Series silicone adhesive sealants are one-part sealants that offer excellent adhesion, weatherability and elasticity for general glazing and sealing applications.

Method of Application

Contractors® 1000 Series sealant can be applied directly from plastic caulking cartridges with a hand gun or pressure equipment. Contractors SCS1000 silicone sealant is supplied as a ready-to-use, one-part sealant with a lightweight consistency. This consistency remains relatively unchanged over a temperature range of -35 F to 140 F (-37 C to 60 C), allowing the sealant to be easily gunned in any
season, to clean, dry, frost-free surfaces. While Contractors® 1000 Series is gunnable at temperatures as low as -35oF, the cure rate will be very slow below 40 F. Additionally, the sealant may not cure to its design properties if cured at temperatures over 100 F.

Limitations
Not For: Structural Glazing
Not For: Bathrooms – Use SCS1700 Series Sealant
Not For: Concrete, Marble, Limestone, Lead, Zinc, or Below Water Contractors SCS1000 series silicone sealant should not be applied to reflecting, high gloss, or light-colored surfaces where aesthetics are critical, until adequate on -site sealant, surface and ambient atmospheric tests simulating building design are conducted to ascertain material compatibility and migration to adjacent surfaces under actual use conditions. Contractors® 1000 Series silicone sealant is not recommended for mirror installations without the approval of the mirror manufacturer.

Available Sizes:
10.1 oz. Cartridges, 5 - Gallon pails, and 55 –Gallon drums.

Available Colors:
Translucent, White, Black, Aluminum, and Bronze

General Applications:
General Glazing:
Glass, plastic, channel or stop.
Curtainwall Sealing:
Glass, metal, granite and plastic.
General Sealing:
Sheet metal, skylights, ventilators, air conditioning, metal/plastic signs, glass block structures, bedding of marine hardware.

More Information

Contact Us for more information or Click Here to visit the manufactures' web site for more information regarding this product

--------------------------------------------------------------

GE Contractors® SCS1800

NYI stocks this product do to its FAST SKIN/Won’t Attract DIRT

GE Contractors® N, SCS1800 Silicone Sealant is a one-part, neutral cure sealant that offers excellent adhesion, weatherability and elasticity for general glazing and sealing applications.

GE Contractors® N, SCS1800 Silicone Sealant is resistant to normal weathering conditions such as sunlight, ultraviolet radiation, ozone, rain, snow, and temperature extremes. Its excellent weatherability allows long term retention of its electrometric and adhesion properties. GE Contractors® N, SCS1800 Silicone Sealant is resistant to incidental oil and gas contact.

Limitations
Contractors® N, SCS1800 sealants should not be used:

For structural glazing applications
For aquariums
For use in locations subject to continuous water immersion
For applications where FDA or USDA compliance is required
In glass butt joints or other glazing applications where small bubbles which may develop during cure are objectionable
In totally confined spaces as the sealant requires atmospheric moisture to cure

Available Sizes
10.1 oz. Cartridges, 5 - gallon pails, and 55 -gallon drums

Available Colors
Translucent, White, Black, Light Gray, Blue, Bronze, Brown, Beige

General Applications
Contractors® N, SCS1800 sealants may be used as a perimeter weatherseal for field glazing, window installation and general purpose sealing applications.

For surfaces that will be painted

More Information

Contact Us for more information or Click Here to visit the manufactures' web site for more information regarding this product

--------------------------------------------------------------

Download Information

GE Silicones Construction Offset Guide - Product Cross Reference

Construction Sealant Color Chart

GE SCS1800 Information

GE SCS1000 Information